This is the documentation for the latest (main) development branch. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

Touch Sensor Interrupt

Overview

This example demonstrates the use of a touch sensor interrupt function.

Requirements

Touch sensor keys are connected in the following table:

IO Number	IO Nmae	Touch Number
16	PB0	3
17	PB0	4
18	PB0	5
12	PA12	CMOD
14	PA14	CMC

Building and Flashing

Example Location： examples/peripheral/touch_sensor/touch_interrupt

For compilation, burning, and more, please refer to: Quick Start Guide

Running Result

Upon successful execution, the following logs will be output

D/dt              [0.038] add device touch_sensor
D/dt              [0.042] add device gpio
touch sensor 5 activated
touch sensor 5 activated
touch sensor 5 activated
touch sensor 5 activated
touch sensor 5 activated
touch sensor 5 activated
touch sensor 5 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 3 activated
touch sensor 4 activated
touch sensor 4 activated
touch sensor 4 activated
touch sensor 4 activated