This is the documentation for the latest (main) development branch. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

Timer Read

Overview

After starting this application, perform the following actions:

Initialize timer0, timer1, timer2
Start the timer and observe its execution

Environmental Requirements

Please note that w800 supports 6 timers, and the device name in the device tree is timer0, timer1, timer2, timer3, timer4, timer5， Please register as needed

Building and Flashing

Example Location： examples/peripheral/timer

For compilation, burning, and more, please refer to: Quick Start Guide

Running Result

Upon successful execution, the following logs will be output

D/dt              [0.038] add device timer0
D/dt              [0.042] add device timer1
D/dt              [0.046] add device timer2
I/timer_test      [2.052] timer1 TRIGGERED
I/timer_test      [3.052] timer2 TRIGGERED
I/timer_test      [4.052] timer1 TRIGGERED
I/timer_test      [6.052] timer1 TRIGGERED
I/timer_test      [6.052] timer2 TRIGGERED
I/timer_test      [8.046] timer1 TRIGGERED
I/timer_test      [9.046] timer2 TRIGGERED
I/timer_test      [10.046] timer0 TRIGGERED
I/timer_test      [10.046] timer1 TRIGGERED
I/timer_test      [10.050] all timer stop