This is the documentation for the latest (main) development branch. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

scan_adv

Overview

This example demonstrates how to enable both non-connectable advertising and scanning functions of BLE simultaneously.

Requirements

  • A board with BLE support

  • nRF Connect APP

Building and Running

Example Location：examples/bluetooth/scan_adv

compile, burn, and more, see：Quick Start Guide

Running Result

  1. Successfully running will output the following logs

[I] (2) main: ver: 2.0.6dev build at Oct 24 2024 08:04:19
[I] (3) scan_adv: Starting Scanner/Advertiser Demo
[I] (22) bt: Identity: 28:6D:CE:11:22:33 (public)
[I] (23) bt: HCI: version 4.2 (0x08) revision 0x0709, manufacturer 0x070c
[I] (23) bt: LMP: version 4.2 (0x08) subver 0x0709
[I] (23) scan_adv: Bluetooth initialized

  1. Run nRF Connect APP, perform scan and you will find WM BROADCASTER .Check the Manufacturer data field in the advertisement information. The last byte represents the number of times the scan function has received the advertisement message.

../../../../_images/scan_adv.svg

Tip

In this example, the advertising is not connected, and the dynamic advertising data can be viewed by refreshing the scan results on the APP side